Everlight one-wire RGB+IC (5V01)

1-wire RGB · Everlight Electronics · everlight

Channels
RGB
Bits / channel
8
Supply
3.8–5.5 V
PWM
—
Backup data
no
Packages
2

Everlight’s “RGB+IC” chip LEDs, sold as 1.8 mm and 3.0 mm chip packages by a major LED maker. Digi-Key lists both as “Addressable Lighting, 1 LED Discrete Serial (Shift Register)”. The sheets carry the part suffix 5V01 and name no IC.

Refresh & flicker

The 12-23C sheet gives absolute maximum supply +3.8 to +5.5 V; the 19-C47 sheet gives +4.2 to +5.5 V and an 800 kbps clock limit. Propagation delay up to 300 ns (12-23C). Colour order is R, G, B, MSB first: the 12-23C data diagram and the application note agree. That is NOT the GRB of the WS2812 family. LED drive current per channel is not stated; luminous intensity is specified at 5 mA.

Timing

Everlight one-wire RGB+IC (5V01) bit timingEverlight one-wire RGB+IC (5V01) bit timing: a zero bit is 300 nanoseconds high then 900 low; a one bit is 900 high then 300 low; tolerance plus or minus 80 nanoseconds; reset 50 microseconds low1 · Bit encoding, to scaleDINhighlowbit 0 period 1200 nsbit 1 period 1200 nsT0H 300 ±80 nsT1H 900 ±80 nsT0L 900 ±80 nsT1L 300 ±80 ns"0" bit"1" bit020040060080010001200140016001800200022002400time, ns± tolerance on each falling edge2 · One frame: 24 bits, most-significant bit firstDIN170110010007100110101700101100bitch 1 · 8 bitsch 2 · 8 bitsch 3 · 8 bitsChannel order not recorded for this protocol · frame = 24 × ~1200 ns ≈ 28.8 µs · example data, first bits 1 0 1 …3 · RESET / latchlast bits of frame 1first bits of frame 2LEDs latch the data they receivedRESET: DIN low ≥ 50 µs (not to scale)4 · Cascade: each DOUT feeds the next DINMCULED 1DINDOUTLED 2DINDOUTLED NDINDOUTLED 1 keeps the first 24 bits, re-shapes the signal and sends the rest out on DOUT;LED 2 keeps the next 24, and so on. The last LED's DOUT is left unconnected.
T0H 300 / T0L 900 · T1H 900 / T1L 300 ns · ±80 ns · period 1200 ns · reset 50 µs source: datasheet
SourceT0HT0LT1HT1LPeriodRateReset±
datasheet ↗ 300 ns 900 ns 900 ns 300 ns 1200 ns 833 kHz 50 µs 80 ns
Both sheets give T0H 300 +/-80, T0L 900 +/-80, T1H 900 +/-80, T1L 300 +/-80 ns and reset above 50 us. The sheets label this “High Speed mode”, implying a second mode, but no other mode is documented.

Clones & compatibility

“Compatible” is never stated bare here — each relationship carries how strong the claim is, and what bites if you assume too much.

Library support

Parts using this protocol

Dating evidence

Evidence, not a release date. A library commit proves the part existed by that date and says nothing about how long before.

  • 2020-03-19 datasheet revision Everlight 12-23C/RSGHBHW-5V01/2C datasheet, Rev 6 release date ↗ day
  • 2019-10-24 datasheet revision Everlight 19-C47/RSGHBHC-5V01/2T datasheet, Rev 5 release date ↗ day