IN-PI33QBTPRPGPBPW-XX
3537 · smd · Inolux PI RGBW (single-trace IC, 32 bit) · Inolux Corporation
1-wire RGBW 3.7–5.5 V active
Also sold as IN-PI33QBTPRPGPBPW-XX
At a glance
- Colour
- RGBW8 bits per channel
- Data
- 1-wiretimed pulses on one line
- Supply
- 3.7–5.5 Vno backup data line
- Size
- 3.7 × 3.5 × 1.9 mm6 pins · top
- Max current
- 45 mA9 mA per channel
- PWM
- 1.2 kHzreset 80 µs
- Library support
- FastLED WLED Adafruit
3.7 x 3.5 x 1.9 mm RGBW pixel. The suffix after PW is the white option: -30 and -40 are the two LCSC SKUs; the sheet lists 3000, 4000 and 6000 K whites but does not map them to the suffix, so the temperatures are not assigned to the variants. Timing T0H 0.2 / 0.32 / 0.4 us, T1H 0.58 / 0.64 / 1.0 us, reset >80 us; ESD 4 kV. LCSC stock 0 for both on 2026-10-15.
Variants
One row per orderable SKU. Everything not listed is inherited from the part above.
| Order code | Face | Lens | White | Pins | Silicon | Status | First seen | Datasheet |
|---|---|---|---|---|---|---|---|---|
| IN-PI33QBTPRPGPBPW-30 | — | — | — | 6 | — | active | 2020-08-10 | 1.01.0 ↗ |
| LCSC C22148673, stock 0. White option -30 (probably 3000 K; not stated). | ||||||||
| IN-PI33QBTPRPGPBPW-40 | — | — | — | 6 | — | active | 2020-08-10 | 1.01.0 ↗ |
| LCSC C7454380, stock 0. White option -40 (probably 4000 K; not stated). | ||||||||
Pinout
- No connect
- Ground
- Data
- Power
- Pin 1
- Cut corner
Outline and pin positions checked against the manufacturer datasheet (C22148673 IN-PI33QBTPRPGPBPW-XX v1.0 p1-2). Pad width and column pitch are estimates; the 2.20 mm callout across the outer pads gives the 1.1 mm row pitch and 0.6 mm is the pad-height callout. Pin 1 (NC) is top-left beside the chamfer. What this means.
- 1 NC nc
- 2 GND ground
- 3 DIN data in
- 4 VDD power
- 5 DOUT data out
- 6 VDD power
Protocol — Inolux PI RGBW (single-trace IC, 32 bit)
Timings shown from datasheet.
Compatibility
-
protocol compatible
SK6812 RGBW
Frame layout only: 32 bit, G R B W, MSB first, one wire, which is the layout the sk6812-rgbw protocol records. The typical T1H here is 750 ns (640 on the PI33QB sheet), not the 600 ns of the SK6812 rev. 02 table. The Inolux sheets never name SK6812. source ↗
Dating evidence
Nobody announces these parts, so this records what we can actually cite rather than a release date. Library support proves only that the part existed by that date.
Where to buy
Stub data — a few rows so purchase links can grow later. Prices are not tracked.
Similar parts
Same protocol or package first, then the same data scheme and colour channels.
Was this page useful?
0 people found this useful