addressable.wiki
1.3 × 1.3 mm 6 pins top-emitting

WS2816-1313

1313 · smd · WS2816 · WorldSemi

1-wire RGB 3.3–5.5 V backup data line active

Also sold as WS2816 1313

At a glance

Colour
RGB16 bits per channel
Data
1-wiretimed pulses on one line
Supply
3.3–5.5 Vbackup data line
Size
1.3 × 1.3 × 0.7 mm6 pins · top
Max current
—per-channel not recorded
PWM
10 kHzreset 280 µs
Library support
FastLED WLED Adafruit

The 1.3 mm 16-bit family comes in three pin counts that are not footprint compatible: the 6-pin WS2816C-1313 (pads in two rows of three along the top and bottom edges), the 5-pin WS2816A-1313 (FDIN backup input, no BO) and the 4-pin WS2816C-1313/4P (VDD, DO, GND, DI).

Variants

One row per orderable SKU. Everything not listed is inherited from the part above.

Order codeFaceLensWhite PinsSiliconStatusFirst seenDatasheet
WS2816C-1313 — — — 6 — active unknown PDF
6 pins: VDD, DI, BI along the top, DO, BO, GND along the bottom. Stock 21,725.
WS2816A-1313 — — — 5 — active unknown PDFPDF ↗
5 pins; the sheet says “current-boost” constant current. Stock 8,235. LCSC lists it as SMD1313-4P although the sheet has five pins.
WS2816C-1313/4P — — — 4 — active unknown PDFPDF ↗
4 pins: the same order as the WS2812B-1313. Stock 67,750 - the most-stocked 16-bit part.

Pinout

These variants do not share a pinout. Check which one you are buying before laying out a board.

WS2816C-1313
WS2816-1313 1313 package, top and side viewPin 1 is ringed. pin 1 VDD (power), pin 2 DI (data in), pin 3 BI (backup in), pin 4 DO (data out), pin 5 BO (backup out), pin 6 GND (ground).11 VDD22 DI33 BI44 DO55 BO66 GND1.3 mm1.3 mmtop view0.7 mmside view
  • Power
  • Data
  • Backup data
  • Ground
  • Pin 1
  • Triangle mark

Outline and pin positions checked against the manufacturer datasheet (WS2816 1313 sheet p2). What this means.

  1. 1 VDD power
  2. 2 DI data in
  3. 3 BI backup data in
  4. 4 DO data out
  5. 5 BO backup data out
  6. 6 GND ground
WS2816A-1313
WS2816-1313 1313 package, top and side viewPin 1 is ringed. pin 1 VDD (power), pin 2 DI (data in), pin 3 FDIN (backup in), pin 4 DO (data out), pin 5 GND (ground).11 VDD22 DI33 FDIN44 DO55 GND1.3 mm1.3 mmtop view0.7 mmside view
  • Power
  • Data
  • Backup data
  • Ground
  • Pin 1
  • Triangle mark

Outline and pin positions checked against the manufacturer datasheet (WS2816 1313 sheet p2). What this means.

  1. 1 VDD power
  2. 2 DI data in
  3. 3 FDIN backup data in
  4. 4 DO data out
  5. 5 GND ground
WS2816C-1313/4P
WS2816-1313 1313 package, top and side viewPin 1 is ringed. pin 1 VDD (power), pin 2 DO (data out), pin 3 GND (ground), pin 4 DI (data in).11 VDD22 DO33 GND44 DI1.3 mm1.3 mmtop view0.7 mmside view
  • Power
  • Data
  • Ground
  • Pin 1
  • Triangle mark

Outline and pin positions checked against the manufacturer datasheet (WS2816 1313 sheet p2). What this means.

  1. 1 VDD power
  2. 2 DO data out
  3. 3 GND ground
  4. 4 DI data in

Protocol — WS2816

Timings shown from datasheet.

WS2816 bit timingWS2816 bit timing: a zero bit is 260 nanoseconds high then 1000 low; a one bit is 660 high then 740 low; reset 280 microseconds low1 · Bit encoding, to scaleDINhighlowbit 0 period 1260 nsbit 1 period 1400 nsT0H 260 nsT1H 660 nsT0L 1000 nsT1L 740 ns"0" bit"1" bit02505007501000125015001750200022502500time, nsDatasheet lists unequal bit periods (1260 vs 1400 ns); each bit is drawn with its own.2 · One frame: 48 bits, most-significant bit firstDIN115011001010110010001510011010100110101150010110100101100bitch 1 · 16 bitsch 2 · 16 bitsch 3 · 16 bitsChannel order not recorded for this protocol · frame = 48 × ~1400 ns ≈ 67.2 µs · example data, first bits 1 0 1 …3 · RESET / latchlast bits of frame 1first bits of frame 2LEDs latch the data they receivedRESET: DIN low ≥ 280 µs (not to scale)4 · Cascade: each DOUT feeds the next DINMCULED 1DINDOUTLED 2DINDOUTLED NDINDOUTLED 1 keeps the first 48 bits, re-shapes the signal and sends the rest out on DOUT;LED 2 keeps the next 48, and so on. The last LED's DOUT is left unconnected.BIN (backup): tied to the previous pixel's DIN
T0H 260 / T0L 1000 · T1H 660 / T1L 740 ns · reset 280 µs source: datasheet

Compatibility

  • electrically similar WS2813

    Both have a backup (breakpoint-resume) data line in the 6-pin and 6-pad packages, but the WS2816 frame is 48 bits per pixel against 24, so the data stream is not interchangeable. The 4-pin and 5-pin WS2816 variants have no backup input at all.

  • electrically similar of this WL-ICLED (48-bit, bypass pin)

    Both are 6-pin single-wire parts with a second input and 12-16 bit channels, but the WS2816 frame is 16-bit per channel with its own backup semantics and this sheet specifies 12-bit PWM plus a 4-bit current gain. Not interchangeable on the wire.

Dating evidence

Nobody announces these parts, so this records what we can actually cite rather than a release date. Library support proves only that the part existed by that date.

  • 2020-01-06 datasheet revision WorldSemi WS2816C-2121 datasheet (LCSC C965561) Modify Record: 'V1.0 N New-Official release 20200106' ↗ day

Where to buy

Stub data — a few rows so purchase links can grow later. Prices are not tracked.

Similar parts

Same protocol or package first, then the same data scheme and colour channels.

Was this page useful?

0 people found this useful