addressable.wiki
size not recorded 6 pins top-emitting

WS2816B

5050 · smd · WS2816 · WorldSemi

1-wire RGB 3.3–5.5 V backup data line active

Also sold as WS2816B 5050

At a glance

Colour
RGB16 bits per channel
Data
1-wiretimed pulses on one line
Supply
3.3–5.5 Vbackup data line
Size
—6 pins · top
Max current
—per-channel not recorded
PWM
10 kHzreset 280 µs
Library support
FastLED WLED Adafruit

16-bit-per-channel WS2816 in the six-pad 5050: 1 BO, 2 VCC, 3 DO, 4 DI, 5 GND, 6 BI, 3.3-5.5 V, with a backup (breakpoint-resume) data line like the WS2813.

Variants

One row per orderable SKU. Everything not listed is inherited from the part above.

Order codeFaceLensWhite PinsSiliconStatusFirst seenDatasheet
WS2816B — — — 6 — active unknown PDF
Stock 14,375 when checked.

Pinout

WS2816B
WS2816B 5050 package, top and side viewPin 1 is ringed. pin 1 BO (backup out), pin 2 VCC (power), pin 3 DO (data out), pin 4 DI (data in), pin 5 GND (ground), pin 6 BI (backup in).11 BObackup out22 VCCpower33 DOdata out44 DIdata in55 GNDground66 BIbackup in5.4 mm overall5.0 mmtop view
  • Backup data
  • Power
  • Data
  • Ground
  • Pin 1
  • Cut corner

Outline and pin positions checked against the manufacturer datasheet (C114592 WS2813B-B sheet p2 pin diagram). What this means.

  1. 1 BO backup data out
  2. 2 VCC power
  3. 3 DO data out
  4. 4 DI data in
  5. 5 GND ground
  6. 6 BI backup data in

Protocol — WS2816

Timings shown from datasheet.

WS2816 bit timingWS2816 bit timing: a zero bit is 260 nanoseconds high then 1000 low; a one bit is 660 high then 740 low; reset 280 microseconds low1 · Bit encoding, to scaleDINhighlowbit 0 period 1260 nsbit 1 period 1400 nsT0H 260 nsT1H 660 nsT0L 1000 nsT1L 740 ns"0" bit"1" bit02505007501000125015001750200022502500time, nsDatasheet lists unequal bit periods (1260 vs 1400 ns); each bit is drawn with its own.2 · One frame: 48 bits, most-significant bit firstDIN115011001010110010001510011010100110101150010110100101100bitch 1 · 16 bitsch 2 · 16 bitsch 3 · 16 bitsChannel order not recorded for this protocol · frame = 48 × ~1400 ns ≈ 67.2 µs · example data, first bits 1 0 1 …3 · RESET / latchlast bits of frame 1first bits of frame 2LEDs latch the data they receivedRESET: DIN low ≥ 280 µs (not to scale)4 · Cascade: each DOUT feeds the next DINMCULED 1DINDOUTLED 2DINDOUTLED NDINDOUTLED 1 keeps the first 48 bits, re-shapes the signal and sends the rest out on DOUT;LED 2 keeps the next 48, and so on. The last LED's DOUT is left unconnected.BIN (backup): tied to the previous pixel's DIN
T0H 260 / T0L 1000 · T1H 660 / T1L 740 ns · reset 280 µs source: datasheet

Compatibility

  • electrically similar WS2813

    Both have a backup (breakpoint-resume) data line in the 6-pin and 6-pad packages, but the WS2816 frame is 48 bits per pixel against 24, so the data stream is not interchangeable. The 4-pin and 5-pin WS2816 variants have no backup input at all.

  • electrically similar of this WL-ICLED (48-bit, bypass pin)

    Both are 6-pin single-wire parts with a second input and 12-16 bit channels, but the WS2816 frame is 16-bit per channel with its own backup semantics and this sheet specifies 12-bit PWM plus a 4-bit current gain. Not interchangeable on the wire.

Dating evidence

Nobody announces these parts, so this records what we can actually cite rather than a release date. Library support proves only that the part existed by that date.

  • 2020-01-06 datasheet revision WorldSemi WS2816C-2121 datasheet (LCSC C965561) Modify Record: 'V1.0 N New-Official release 20200106' ↗ day

Where to buy

Stub data — a few rows so purchase links can grow later. Prices are not tracked.

Similar parts

Same protocol or package first, then the same data scheme and colour channels.

Was this page useful?

0 people found this useful