TBA-T2020M-J1I16
2222 · smd · AB1002A (Nationstar dual-input) · Nationstar
1-wire RGB 3.3–12 V active
Also sold as TBA-T2020M-J1I16, Nationstar dual-input 2222, AB1002A LED
At a glance
- Colour
- RGB— bits per channel
- Data
- 1-wiretimed pulses on one line
- Supply
- 3.3–12 Vno backup data line
- Size
- 2.2 × 2.2 × 1.0 mm6 pins · top
- Max current
- —per-channel not recorded
- PWM
- —reset 80 µs
- Library support
- FastLED WLED Adafruit
A six-pad addressable LED with two data inputs (DI0, DI1) and two data outputs (DO0, DO1), driven by the IC the sheet calls AB1002A. The sheet is a “temporary version” release and the part is not a pin-compatible replacement for any 5050 or 2020 part: the package is 2.2 x 2.2 mm with pads on two edges, listed by LCSC as “SMD2222-6P” while the part number says 2020.
Pin order is column-wise, not a ring: the right column from the top is GND, DO1, DO0 (pins 1 to 3), the left column from the top DI1, DI0, VDD (pins 4 to 6). The catalogue’s drawing places each pad by those printed names and numbers.
What the sheet says about the two inputs is on the protocol page; it does not say which of DI0 and DI1 is primary or how the second input is used. Not verified on hardware. LCSC stock 4,320.
Variants
One row per orderable SKU. Everything not listed is inherited from the part above.
| Order code | Face | Lens | White | Pins | Silicon | Status | First seen | Datasheet |
|---|---|---|---|---|---|---|---|---|
| TBA-T2020M-J1I16 | — | — | — | 6 | — | active | 2022-07-20 | A |
| LCSC stock 4,320 on 2026-10-15. | ||||||||
Pinout
- Ground
- Data
- Power
- Pin 1
- Cut corner
Outline and pin positions checked against the manufacturer datasheet (C22461777 TBA-T2020M-J1I16 spec, PDF p4 / printed p3 (front view, front see-through view, polarity diagram) and PDF p5 (pin table)). Not a ring: pins 1 to 3 run down the RIGHT column (1 GND top, 2 DO1, 3 DO0 bottom), pins 4 to 6 down the LEFT column (4 DI1 top, 5 DI0, 6 VDD bottom). The pad names are printed on the see-through view; the numbers are from the pin table. Pad size and pitch are the sheet's labels (0.55 wide, 0.35 tall, 0.30 gap, 1.1 gap between the columns). The nick mark ('A') is drawn at the bottom-right corner of the front view, beside DO0; the sheet does not say it marks pin 1. What this means.
- 1 GND ground
- 2 DO1 data out
- 3 DO0 data out
- 4 DI1 data in
- 5 DI0 data in
- 6 VDD power
Protocol — AB1002A (Nationstar dual-input)
Timings shown from datasheet.
Dating evidence
Nobody announces these parts, so this records what we can actually cite rather than a release date. Library support proves only that the part existed by that date.
- 2022-07-20 datasheet revision Nationstar TBA-T2020M-J1I16 specification, release date (发放日期) on the cover; version A; the pages carry a 'temporary version' (临时版) watermark ↗ day
Where to buy
Stub data — a few rows so purchase links can grow later. Prices are not tracked.
- LCSC C22461777 checked 2026-10-15
Similar parts
Same protocol or package first, then the same data scheme and colour channels.
Was this page useful?
0 people found this useful