SK6112-RG
5050 · smd · SK6112 · OPSCO Optoelectronics
1-wire RGB 3.7–5.5 V active
Also sold as SK6112, SK6112-RG-002
At a glance
- Colour
- RGB8 bits per channel
- Data
- 1-wiretimed pulses on one line
- Supply
- 3.7–5.5 Vno backup data line
- Size
- 5.4 × 5.0 × 1.6 mm4 pins · top
- Max current
- 40.5 mA13.5 mA per channel
- PWM
- 20 kHzreset 250 µs
- Library support
- FastLED WLED Adafruit
A second-generation OPSCO IC in the 5050 package: same pads and pin positions as the SK6812, but the sheet adds an advanced mode - feedback (link return), 32-step current gain, PWM adjustable 1.2-20 kHz (default 20 kHz), sleep mode with 5 uA, up to 15 parallel channels and dynamic/fixed IDs. 250 us reset. Not documented anywhere in FastLED/WLED as far as this catalogue knows.
Variants
One row per orderable SKU. Everything not listed is inherited from the part above.
| Order code | Face | Lens | White | Pins | Silicon | Status | First seen | Datasheet |
|---|---|---|---|---|---|---|---|---|
| SK6112-RG | — | — | — | 4 | — | active | 2019-02-16 | B/2 |
| Stock 860 when checked. | ||||||||
Pinout
- Ground
- Data
- Power
- Pin 1
- Cut corner
Outline and pin positions checked against the manufacturer datasheet (C5440833 sheet p4-5 (same drawing as SK6812)). Pin numbers follow the 2021+ OPSCO sheets (1 GND at the cut corner, 2 DIN, 3 VDD, 4 DOUT); the 2015 sheet numbers the same pads 1 VDD, 2 DOUT, 3 VSS, 4 DIN. What this means.
- 1 GND ground
- 2 DIN data in
- 3 VDD power
- 4 DOUT data out
Protocol — SK6112
Timings shown from datasheet.
Compatibility
-
protocol compatible
SK6812
Accepts SK6812-style 24-bit frames in its default mode and sits in the same 5050 and 3.5 x 3.7 mm packages with the same pad positions, but it is a different IC with extra commands (feedback, current gain, sleep, IDs) and a 250 us reset. Whether a plain SK6812 driver is fully compatible has not been tested. source ↗
-
electrically similar of this
TONYU 6112
Inferred from the part code, the described feature set and the printed numbers; the TONYU sheet never names OPSCO or SK6112. OPSCO's SK6112-RG-002 sheet prints T0H 250/320/400, T0L at least 800, T1H 750/900/1000, T1L at least 200 ns and reset above 250 us, and (per this catalogue's SK6112 entry) has a command mode with feedback and current gain; TONYU's windows are slightly wider (T0H 150-450, T1H 750-1050) and its PWM is 1.2 kHz where OPSCO's advanced mode defaults to 20 kHz. The command protocol is not printed in the TONYU sheet, so command-level compatibility is unknown.
Dating evidence
Nobody announces these parts, so this records what we can actually cite rather than a release date. Library support proves only that the part existed by that date.
- 2019-02-16 datasheet revision OPSCO SK6112-RG datasheet (LCSC C5440833) revision table: 'A/0 2019-02-16 first issue' ↗ day
Where to buy
Stub data — a few rows so purchase links can grow later. Prices are not tracked.
- LCSC C5440833 checked 2026-10-15
Similar parts
Same protocol or package first, then the same data scheme and colour channels.
Was this page useful?
0 people found this useful