BB-HBGR32L-3-TRB-8
5050 · smd · ABOC HBGR32L two-wire IC (18 mA) · American Bright Optoelectronics
SPI RGB 4.5–5.5 V active
Also sold as BL-HBGR32L-3-TRB-8, HBGR32L
At a glance
- Colour
- RGB8 bits per channel
- Data
- SPIclock + data, timing-tolerant
- Supply
- 4.5–5.5 Vno backup data line
- Size
- 5.4 × 5.0 × 1.6 mm6 pins · top
- Max current
- 54 mA18 mA per channel
- PWM
- 20 kHzno reset period
- Library support
- FastLED WLED Adafruit
Datasheets disagree: see the aboc-hbgr32l protocol. The BB- sheet (Ver2.0) puts Red, Blue, Green in the LED frame and gives DIN VIH 3.0 V; the BL- sheet (Ver2.2) puts Blue, Green, Red and VIH 0.7 x VCC. The part number says BGR. The two sheets also differ in the IC driver diagram (the BB- sheet’s Rev. 1.3-1.5 rows modify the IC driver diagram and pin names). The LCSC titles read ‘BB-’ for C21708551 (brand ABOC) and ‘BL-’ for C5119290 (also brand ABOC), so the same device is sold under both prefixes. Pin order 1 DI, 2 CI, 3 GND, 4 VCC, 5 CO, 6 DO. LCSC stock 0 for both SKUs on 2026-10-15.
Variants
One row per orderable SKU. Everything not listed is inherited from the part above.
| Order code | Face | Lens | White | Pins | Silicon | Status | First seen | Datasheet |
|---|---|---|---|---|---|---|---|---|
| BB-HBGR32L-3-TRB-8 | — | clear | — | 6 | — | active | 2017-11-09 | Ver2.0Ver2.2 ↗ |
| LCSC C21708551, stock 0. Ver2.0 sheet (2021-04-07). | ||||||||
| BL-HBGR32L-3-TRB-8 | — | clear | — | 6 | — | active | 2017-11-09 | Ver2.0Ver2.2 ↗ |
| LCSC C5119290, stock 0. Ver2.2 sheet (2021-03-31), listed as SMD-6P 5x5. | ||||||||
Pinout
- Data
- Clock
- Ground
- Power
- Pin 1
- Cut corner
Outline and pin positions checked against the manufacturer datasheet (C21708551 BB-HBGR32L-3-TRB-8 Ver2.0 p1). Top view: 1 DI, 2 CI, 3 GND down the left edge, 4 VCC, 5 CO, 6 DO up the right edge; the cut corner is at pin 1. The three-pad rows are 4.5 mm tall overall; the middle pad is shorter than the outer two on the sheet, a uniform pad is drawn. What this means.
- 1 DIN data in
- 2 CIN clock in
- 3 GND ground
- 4 VCC power
- 5 COUT clock out
- 6 DOUT data out
Protocol — ABOC HBGR32L two-wire IC (18 mA)
This is an SPI part: the clock is explicit, so there is no fixed bit period. The frame layout is shown below.
Compatibility
-
protocol compatible
APA102
The frame is APA102-shaped (32 zero bits, 111 + 5-bit brightness + three 8-bit values, 32 one bits) and the sheet shows the same SDI/CKI waveform. The two sheets disagree about the colour order, and neither names APA102, so only the frame structure is compared. source ↗
Dating evidence
Nobody announces these parts, so this records what we can actually cite rather than a release date. Library support proves only that the part existed by that date.
Where to buy
Stub data — a few rows so purchase links can grow later. Prices are not tracked.
Similar parts
Same protocol or package first, then the same data scheme and colour channels.
Was this page useful?
0 people found this useful